Inconel 600 - SAE AMS 5540P-2017

Grade	Inconel 600
Corresponding Standard	SAE AMS 5540P-2017 Nickel Alloy, Corrosion and Heat-Resistant, Sheet, Strip, and Plate 74Ni - 1 5.5Cr - 8.0Fe Annealed
Classification	Nickel and Nickel Alloys
Properties	Corrosion Resistance
Density	8.5 g/cm³

Inconel 600 Chemical Element Composition Content (%)

Component	Fe	C	Si	Mn	P	S	Cr	Ni	Cu	Ti	Nb	Co	Al	Ta
Minimum Value	6	-	-	-	-	-	14	72	-	-	-	-	-	-
Maximum Value	10	0.15	0.5	1	0.04	0.015	17	-	0.5	0.5	1	1	0.35	0.05

Inconel 600 Mechanical Properties

thickness t mm	Heat Treatment or Condition	Tensile Strength σ_b Mpa	Yield Point σ_s Mpa	Elongation or Extension Rate δ %
t≤50.8（2in.）	Annealing	≥552	≥241	≥30

Inconel600 Corresponding Standards(Same grade name, different standards)

Note: The data is for reference only! If you have any questions, please fill out "I want to correct it"!